2. A well of 0.1 m radius is installed in the aquifer of the preceding exercise

Question:

The question is not complete. See the complete question and the answer below.

A well that pumps at a constant rate of 0.5m3/s fully penetrates a confined aquifer of 34 m thickness. After a long period of pumping, near steady state conditions, the measured drawdowns at two observation wells 50m and 100m from the pumping well are 0.9 and 0.4 m respectively. (a) Calculate the hydraulic conductivity and transmissivity of the aquifer (b) estimate the radius of influence of the pumping well, and (c) calculate the expected drawdown in the pumping well if the radius of the well is 0.4m.

T = 0.11029m²/sec

Radius of influence = 93.304m

expected drawdown = 3.9336m

Explanation:

See the attached file for the explanation.

the answer is a

Explanation:

i just took the test